Brother WP330MDS - Manual (Page 48)

Jumping Left and Right
’’" cod T"^'
^
+
CODE
--
The Express Backspace and Relocation functions take you to the beginning and end
of the current line of text, respectively.
NOTES:
• CODE + EXPR moves the cursor to the left margin. If you press CODE + M REL
at the left margin position, the cursor goes all the way to the left edge. When you
are in the middle of an indented paragraph (See '‘Paragraph Indent on page 56),
it goes back to the temporary left margin.
• CODE + RELOC moves the cursor to the end of the current line but does not
jump past a symbol that signals the end of a paragraph { , itJ , and ^ ). If
you press CODE + M REL at the right margin position, the cursor goes all the
way to the right edge.
Moving One Fuii Screen at a Time
^
CODE
^
+ rn
------------ -1
F
CODE i '
4,
]'
2
CODE + PRE S scrolls one full screen down (minus an overlap of one line). If the
cursor is not on the first line, the first press of CODE + PRE S will take the cursor to
the beginning of the first line of the current screen. Pressing the same keys from that
point will scroll to the previous screen. Press the same keys again to scroll down one
screen at a time.
CODE + NEXT S scrolls one full screen up (minus an overlap of one line). If the
cursor is not on the last editable line of text, the first press of CODE + NEXT S will
take the cursor to the beginning of the last editable line of the current screen.
Pressing the same keys from that point will scroll to the next screen. Press the same
keys again to scroll up one screen at a time.
NOTES:
• When no message is displayed, a line of text appears in the message area.
However, the cursor cannot reach that line, so that the last editable line is the
second line from the bottom of the screen.
• If there is no more text because you are at the beginning or the end of the
document, the screen window does not scroll.
38