Note – Brother WP330MDS User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Insert the destination diskette and press RETURN. The word processor will
transfer the files that have been read from the source diskette onto the
destination diskette. If all the files on the source diskette have not been
transferred, the word processor will prompt you to reinsert the source diskette,
repeat steps (2) and (3) until all files have been transferred. This may happen
several times until all files are transferred to the destination diskette.
NOTE:
The word processor recognizee the source diskette and the destination diskette.
If you inadvertently insert the wrong diskette,
one
of the following messages will
appear:
Diskette types not compatible. Insert 720KB/2DD diskette and press RETURN.
or
Diskette types not compatible. Insert 1.44MB/2HD diskette and press RETURN.
NOTE:
You may press
CANCEL
at any time (except during diskette access) to stop the
DISK COPY
operation.
When the diskette Is
copied, the
INDEX
screen reappears.
89