Brother WP330MDS User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1. Use CODE + P DOWN or the platen knob to position the carrier where a
correction is required. Move the carrier to the character to be corrected with
BACKSPACE or SPACE BAR.
If
necessary, use CODE + BS 1 to accurately
position the carrier.
Congratulations on your purchase of this new word
A
2. Press CODE + CORRECT. The M.C indicator appears.
3.
Retype the same character again. The character ia erased and the M.C indicator
disappears.
Congr tulations on your purchase of this new word
A
4. Type the desired character.
Congratulations on your purchase of this new word
A
111
Advertising