Creating or editing a framing file, Operation modes – Brother WP330MDS User Manual
Page 159
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Creating or Editing a Framing File
The framing function allows you to create and edit horizontal and vertical lines on the
screen. The framing file can be saved, retrieved, and printed. As shown in the
example below, a frame Is made of single or double horizontal lines and single
vertical lines.
NOTES:
An International or Symbol daisy wheel is necessary to print frames containing
horizontal double lines and all vertical lines.
There is no page or margin control. The number of columns cannot be changed,
even if the PITCH setting is altered.
The framing function is completaly separata from the text function, and
is
only for the purpose of creating lines on the screen and printing them.
Because of this, text and lines may not be displayed nor printed at the
same time, once your frame is printed, use the
TW
application to type the
text.
Operation Modes
The editing functions are divided into three different modes: MOVE, ADD, and DEL
(delete). The shape of the cursor changes according to the mode.
Mode & Cursor Shape
Use this mode to...
MOVE( ■
)
Freely move the cursor without drawing.
ADD(^ ;
Draw vertical and horizontal lines by moving the
cursor in th© appropriate directions.
149