Setting up, Removing the packing pieces – Brother WP330MDS User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Up
Removing the Packing Pieces
Before you plug in the word processor, open the acoustic cover and remove the
yellow plastic pieces shown in the illustrations.
NOTES:
• ¡f the plastic pieces are not removed, damage to the word processor may occur
when the power is turned on.
• The yellow plastic pieces do not need to be re-installed unless you are
transporting the word processor over a great distance.
Lift the acoustic cover.
Remove the yellow plastic pieces.
NOTE:
Be sure to reinstall the acoustic cover. The
acoustic cover is equipped with a safety
switch. Your word processor will not operate
unless the acoustic cover is securely closed.