Kenwood UD-952 - Manual (Page 26)

i Use the following procedure to select desired tracks (up to 32
M tracks) from up to 7 discs and program them in the desired
order.
Preparation ------------------------------------------------------------------
• Select the "CD" input with the MAIN
, [_Qg(J (jig(.g ¡p Q plgyeT.
Programming tracks in desired order
Only "SINGLE TIME" is
displayed in program mode.
U ri I n ■ n n ■'
I U I u ■ U U t
Enter track Nos. in the order you want to play them.
(D Select the disc No.
[within 3 seconds!]
D Select the track No.
To select tracks from more than one CD, repeat steps ©
and © above.
Displays the entered track No.
• Up to 32 tracks can be programmed. FULL is displayed if you at­
tempt to program a 33rd track.
• If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
• If the track No. is not selected within 8 seconds after having se­
lected the disc No. all of the tracks on the disc will be programmed.
• If a disc No. which is not present in the magazine is entered, it is
programmed temporarily but canceled at the time of playback.
• Tracks will be played in the order they were programmed {in order of
P Nos.).
• When the or key is pressed during playback, the track will
be skipped in the direction of the pressed button.
To stop playback To return to playback in order of track Nos.
» Playback in the original order of tracks starts with the track being
played.
■
Use the following procedure to play CDs in the original order
of tracks from track No. 1.
w f ]
' - »J
i » i m\
1