Kenwood UD-952 - Manual (Page 7)

Caution
When installing the system components in a horizontal
cofiguration, place the preamplifier/tuner unit (C-E9) and
power amplifier/graphic equalizer unit (B-E9) to the right of
the CD player unit (DP-ME9) and cassette deck unit (X-E9) as
shown in the connection diagram.
Do not place the CD player and cassette deck to the right of
the power amplifier/graphic equalizer unit, for this will lead
to overheating or malfunction.
Connection of antenna adapter (U,K and Europe only)
0 Strip the cable coating.
When coaxial cable is used When the provided simplified
antenna is used
RG-6 (5C-2V) or RG-59 (3C-2V)
(' 2) Open the antenna adaptor.
Open the claws with the fingers to release
the lock and pull out the cover.
(3) Attach the cable and close the cover.
When coaxial cable is used When the provided simplified
antenna is used
® Connect the adaptor to the antenna terminal.
Insert the cable into the slit on
the clip. Fasten bands A and B
using a pair of pliers.
Insert the antenna cord tip into
the slit on the hardware and
wrap the cord around it.
Optical fiber cable connection
The digital OPTICAL output is designed for use in the connec­
tion with an MD recorder (optionally available). The digital
signal transmission allows you to record the CD sound on MD
without spoiling the high sound quaiity. This jack can also be
connected to an amplifier equipped with a digital optical
input (optical fiber). • When using an optical fiber cable to connect this unit to a MD
recorder or digital amplifier, insert the plug straight into the jack
until a snap sound is heard.
• Be careful not to bend, coil or bundle the optical fiber cable.
• Optical fiber cables available in audio accessory stores may not
always be able to be used with this unit. If your cable cannot be
used with this unit, consult the store from which you purchased
the cable or your nearest dealer.
Connection of speakers
Arrangement of speakers Center speaker (optional) Omni-speakers (optional)