Kenwood UD-952 - Manual (Page 32)

DPSS (Direct Program Search System)
I The DPSS is capable of detecting non-recorded spaces of
more than 4secondsas "blanks between programs". It can be
used in four ways as described below.
Non-recorded spaces (Blank)
1. Skip search
2. Dash & play
3. Rewind playback
4. One-program repeat playback
Skip search
Plays the desired music program from the beginning by skipping programs until there.
Up to 16 programs can be skipped.
Rewinds tape to the beginning and restarts playback from there.
Plays a single music program repeatedly up to 16 times.
During playback of side A (while > is lit)
To play the next program : Press once.
To play the 4th program
after the current program : Press 4 times.
n
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
During playback of side B (while M is lit)
To return to the beginning
of the current program : Press once.
To play the 4th program
before the current program : Press 5 times.
o
To play the next program ; Press once.
To play the 4th program
after the current program : Press 4 times.
I Notes I 1. The DPSS cannot be used on decks A and B simultaneously.
2. The DPSS may not function normally with the following kinds of tape.
• Tapes containing several no-sound intervals of more than 4 seconds, such as conversation and talk tapes.
• Tapes containing pianissimo sections, such as classical music tape.
• Tapes in which large noise is recorded in blanks between programs.
• Tapes containing blanks between programs that are shorter than 4 seconds.
• Tapes recorded at low level.
• Tapes recorded by cross-fade recording (in which the beginning of next program is overlapped on the end of previous program).