F select the "tuner" input, 2 select the frequency hand, L . 4 – Kenwood UD-952 User Manual
Page 35: Flilliilfi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Receiving radio station by specifying its frequency
f
Select the "TUNER" input.
I
Remote control unit only |
2 Select the frequency hand.
J specify the frequency.
©
А(ПП I
FlilliilFI
- -
DIRECT
© & L . 4 ^
Each press changes the inputs as follows.
© CH
® TUNER (frequency display)
© TRPE
@ MH/IinJ
© i'lUED
— ® Rl' RU'/\
Press so that a frequency is displayed.
Each press alternates the band.
[-►(j
Frequency band indicator
r-*-©FM
®MW
I— ®LW
В г
Desired station
Order of pressing numeric keys
FM 90 MHz
(100 kHz space)
[9],[o],®,0
(50 kHz space)
FM 102.5 MHz
(Т],Ш],[1],[1]
(100 kHz space)
(50 kHz space)
AM (MW) 810 MHz
®.ш
(10 kHz space)
(9 kHz space)
AM (MW) 1260 kHz
ш,®,®
(10 kHz space)
(9 kHz space)
"TUNED" indicator iights
when a station is received. Frequency dispiay
В В БО^
» If you enter a wrong frequency, the display will blink. In this case,
you should enter the correct frequency.
I If you make a mistake, press the
CLEAR
key and restart the fre
quency entry from the beginning.