Playback of tape, Tppe playback, Select the “tape" input – Kenwood UD-952 User Manual
Page 30: To wind tape at high speed, Preparation, Time display on cd player, Playback of tape tppe playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J)^CASSETTE
Playback of tape
Tppe playback
/ Select the “TAPE" input
CIS
2 Load a cassette tape.
’
^1
© open the door.
® Insert a tape and close the door.
Each press changes the inputs as follows.
® TUNER (frequency display) disolaved*^^^
- -ЯРЕ
r H PE
Ф MH/URT
® I'lHED
----- ® ПУ nUX
• The type of tape, that is, Nornnal, Chrome or Metal, is set automati
cally.
• Remove tape slack before loading.
• Close the door securely.
Each press switches the modes as follows.
© "c^"....Endless playback occurs.
@ ....Playback stops after having played a side.
I— © "
7
=
2
" ....Playback stops after having played the two sides.
(If the ■< key is pressed, only tape side B will be played
and tape will stop after it.)
!-► © DOLBY NR "B"........................General NR.
® DOLBY NR "C"...................... NR with higher performance.
I
— ©DOLBY NR "OFF"
(no indication)................. ......Dolby NR is not used.
• Select the Dolby NR mode according to the recording condition of
the tape.
• When the remote control unit is used, set the A/B switch according
to the deck to be operated.
To operate deck A
To operate deck В
To stop playback
t Do not press the eject key until the tape has stopped completely.
To wind tape at high speed
icia
To fast wind in direction VK:
I Press the ■ key to stop fast winding.
Preparation
I Select the "CD" input with the MAIN
INPUT key.
» Load discs in the CD player.
UD-959 (En]
Time display on CD player
Each press of the TIME key changes the displayed contents.
■? .Í
Elapsed time of track being played
^ 7 Remaining time of track being played
4 5
Elapsed time of entire disc