Recording (deck b only), Preparation for recording – Kenwood UD-952 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Recording (Deck B only)

This unit incorporates the CRLS (Computer Recording Level
System) automatic recording level setting and Dolby HX Pro
headroom extension to allow excellent sound recording with
simple operation.

The equalizer and presence effects applied to the music are
recorded together with the music sound.
When the Environmental Sound function is applied, the envi­
ronmental sound can be recorded mixed with the music sound.

Enjoy the Environmental Sound recording by combining the
CD and tuner sounds or an external component connected to
the system. (In this case, it is not possible to record the sound
of deck A onto deck B.)

Preparation for recording

ir _ .......-pi

• The type of tape, that is. Normal, Chrome or Metal, is set automati­

cally,

» Remove tape slack before loading.

t

When the microphone is not used, set the

MIC MIXING

control

fully counterclockwise to the minimum position.

• When recording is started, the tape is transported in the direction

selected in this step.

• Wind the tape to the position where recording is to be started.

Each press of the key switches the modes as follows.

r

® "cio" ....(In this case, too, the two tape sides are recorded,

after which recording stops.)

(D "zT;" ....A tape side is recorded, after which recording stops.
@ „..The two tape sides are recorded, after which record­

ing stops.

Each press of the key switches the modes as follows.

г► 0 DOLBY NR "B"..........................B type (general type).

(D DOLBY NR "C"......................C type (with higher performance).

I— ©DOLBY NR "OFF"

(no indication)....................... Dolby NR is not used.

Advertising