Auto space function, To clear tracks from the program, B o s – Kenwood UD-952 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CD V
Auto space function
This function is convenient for recording CD on a cassette tape. When
the
SPACE
key is pressed during programming of tracks, a non-re- j
corded space of a fe\w seconds will be created between tracks. By ,
recording tracks with these spaces on tape, the search and repeat
play operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
• Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
• To cancel the creation of space, press the
SPACE
key again.
To check the programmed tracks \ Remote control unit oniT]
b o s
P - P S
I Each time the key is pressed, the program No. (P-NO) and the disc
No. are displayed.
I The previous display resumes in a few seconds.
To add a track to the program \ Remote control unit only [
• When a track No. is entered, the track will be added to the end of
the existing program.
To change a track in the program \ Remote control unit
'll /75 P- OS
t Press the
CHECK
key repeatedly until the track No, to be changed
is displayed.
• Press while the
P.C.
indicator is lit.
• The track being played cannot be changed.
To clear tracks from the program
Press to clear tracks from the end.
Remote control unit
I
Remote control unit only |
• Each time the key is pressed, the last track in the program is cleared.
• The track being played cannot be cleared.
» The entire program is also cleared when the
P.OPEN/CLOSE
key
is pressed.