Add the ethernet/ip module interface – Comtrol IO-Link Master EIP-4 User Manual
Page 83
Advertising
IO-Link Master EtherNet/IP Reference Manual: 2000589 Rev. A
Chapter 6. ControlLogix Family - Example PLC Programs - 83
Add the EtherNet/IP Module Interface
6.3. Add the EtherNet/IP Module Interface
If the controller has been changed or if the Ethernet module is different, you will need to add the EtherNet/IP
module to the PLC program.
You can use this procedure to add the Ethernet module for your PLC in the corresponding slot.
1.
Click IO Configuration and select New Module.
2.
Select the Ethernet Module Type and click OK.
Advertising