Comtrol ES8508 Series User Guide - Manual (Page 104)

104 - IGMP Snooping RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web Interface
IGMP Snooping
Use this page to enable the IGMP Snooping feature, assign IGMP Snooping for specific VLANs, and view the
IGMP Snooping table from a dynamic learnt.
Note: You must Save the settings ( Page 129 ), if you want to maintain these settings if the ES8508 is powered
off.
IGMP Snooping Page
IGMP
Snooping
You can select Enable or Disable. After enabling IGMP Snooping, you can
then enable IGMP Snooping for specific VLAN.
You can Enable IGMP Snooping for some VLANs so that some of the VLANs
support IGMP Snooping and others do not.
To assign IGMP Snooping to VLAN, click the check box of the VLAN ID or
click the Select All check box for all VLANs and then click Enable. You can
also Disable IGMP Snooping for certain VLANs using the same method.
IGMP
Snooping
Table This table displays the multicast group IP address, VLAN ID it belongs to,
and member ports of the multicast group. The ES8508 supports 256
multicast groups. Click Reload to refresh the table.