Comtrol ES8508 Series User Guide - Manual (Page 40)

40 - Feature Overview RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web User Interface
The Welcome page of the web management interface then appears.
5. If you have not done so, you can change the ES8508 IP address to meet your network environment.
a. Double-click Basic Setting.
b. Click IP Configuration.
- To use static addressing, enter a valid IP address, subnet mask and default gateway.
- To use DHCP, click Enable in the DHCP Client drop list.
c. Click Apply.
You can use the Feature Overview on Page 40 to locate other features that you may want to configure.
Feature Overview
The following table provides detailed information about ES8508 features and provides the location of the
configuration information in the web user interface.
Type Category Details
802.1x Port-Based
Network Access
Control
Configuration
802.1x
Configuration
on
Page 112
• System Authentication Control - Enable/Disable
• Authentication Method - RADIUS or Local
• RADIUS Server - IP Address, Shared Key, Server Port,
and Accounting Port
• Local RADIUS User - User Name, Password, and VID
• Secondary RADIUS Server - IP Address, Shared Key,
Server Port, and Accounting Port
• Local RADIUS User List