Comtrol ES8508 Series User Guide - Manual (Page 84)

84 - MSTP Information RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web Interface
MSTP Information
This page allows you to see the current MSTP information. Choose the Instance ID first. If the instance is not
added, the information remains blank.
Edge Port
Present in implementations that support the identification of edge ports. All
ports directly connected to end stations cannot create bridging loops in the
network and can thus directly transition to forwarding, and skipping the
listening and learning stages. When the non-bridge device connects an edge
port, this port is in a blocking state and turn to forwarding state in 2*Hello
Time seconds. When the bridge device connects an edge port, this port is a
non-edge port automatic.
Apply
Click the Apply button to apply the configuration.
Note: You must Save the settings ( Page 129 ), if you want to maintain these
settings if the ES8508 is powered off.
MSTP Port Configuration Page (Continued)