Admin password – Comtrol ES8508 Series User Guide User Manual
Page 50
50 - Admin Password
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Configuration Using the Web Interface
Admin Password
You can change the user name and the password here to enhance security.
System OID
The SNMP Object ID of the ES8508. You can follow the path to find its private MIB
in an MIB browser.
Note: When you attempt to view private MIB, you should first compile private MIB
files into your MIB browser.
System Description
RocketLinx ES8508 or RocketLinx ES8508F Industrial Managed Ethernet Switch is
the system description.
Firmware Version
Displays the firmware version installed in this ES8508.
Device MAC
Displays a unique hardware address (MAC address) assigned in the factory.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want to maintain these settings
if the ES8508 is powered off.
Admin
Password
Description
User name
You can enter a new user name here. The default
name is admin.
Password
You can enter a new password here. The default
password is admin.
Confirm
Password
You need to type the new password again to
confirm it.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if
you want to maintain these settings if the
ES8508 is powered off.
Switch Setting Page (Continued)