Comtrol ES8508 Series User Guide - Manual (Page 30)

30 - Using the LED Tracker RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Using PortVision DX
Using the LED Tracker
RocketLinx managed switches support the LED Tracker feature, which allows you to toggle on/off the LEDs
on a specific device so that you can locate the physical unit.
Use this procedure to toggle the LED Tracker feature on RocketLinx switches.
1. Right-click the ES8508 in the Device List pane, click Tracker, and then click ON.
The ES8508 SYS LED will flash for five seconds.
2. If necessary, you may need to click Tracker and ON several times to catch the flashing SYS LED.