Backup the configuration - tftp server method, Start the tftp server, Backup the configuration - tftp – Comtrol ES8508 Series User Guide User Manual

Page 64: Server method

Advertising
background image

64 - Backup the Configuration - TFTP Server Method

RocketLinx ES8508 Series User Guide: 2000575 Rev. A

Configuration Using the Web Interface

Backup the Configuration - TFTP Server Method

You must use a TFTP server to create or load backup files if you are using the following operating systems:

Windows Server 2003

Windows Vista

Windows Server 2008

Windows 7

Windows Server 2012

Windows 8

If you do not have a TFTP server, you can download one from Comtrol using the

Start the TFTP Server

subsection. You need to disable the Windows firewall, you can use the procedures in

Disable the Windows

Firewall

on Page 65. After opening a TFTP server and disabling you can do the following:

Backup the Configuration - TFTP Server Method

on Page 64

Restore the Configuration - TFTP Server Method

on Page 67

Start the TFTP Server

Use this procedure to download either
the 32-bit or the 64-bit version from
Comtrol.

1.

If necessary, download the
appropriate .zip file for your
operating system from:

ftp://

ftp.comtrol.com/contribs/
free_3rd_party_utils/tftp_server

/

to your system and unzip the file.

2.

Execute the TFTP server
application, click Allow access, and
the TFTP server opens.

3.

Leave the TFTP server open and
go to the next subsection to
temporarily disable the firewall.

TFTP Server IP Address

Advertising