Uploading the latest firmware or bootloader – Comtrol ES8508 Series User Guide User Manual
Page 25
RocketLinx ES8508 Series User Guide: 2000575 Rev. A
Uploading the Latest Firmware or Bootloader - 25
Using PortVision DX
Uploading the Latest Firmware or Bootloader
You can use the following procedure to upload the latest firmware or bootloader.
1.
If you have not done so, download the latest firmware and bootloader using the previous subsection.
2.
Right-click the ES8508 in the Device List pane that you want to update, click Advanced --> Upload
firmware.
3.
Click Yes to the Upload Firmware message.
4.
Click Ok to the message notifying you that you should
wait to use the ES8508 when the status returns to
ON-LINE.
5.
Right-click ES8508 in the Device List pane and click Refresh. Optionally, you can click the Refresh button
in the Toolbar and that refreshes all devices in PortVision DX.
6.
Verify that the version change is reflected in under the Software Version.