Snmp v3 profile – Comtrol ES8509-XT User Manual
Page 106
106 - SNMP V3 Profile
RocketLinx ES8509-XT User Guide: 2000557 Rev. C
Configuration Using the Web Interface
SNMP V3 Profile
SNMP v3 can provide more security functions when you perform remote management through SNMP
protocol. It delivers SNMP information to the administrator with user authentication; all of data between the
ES8509-XT and the administrator are encrypted to ensure secure communication.
Note: You must Save the settings (
), if you want to maintain these settings if the ES8509-XT is
powered off.
SNMP V3 Profile Page
User Name
SNMP v3 user name.
Security Level
Select the following levels of security: None, Authentication, and
Authentication and Privacy.
Auth Level
Select either MD5 (Message-Digest algorithm 5) or SHA (Secure
Hash Algorithm).
•
MD5 is a widely used cryptographic hash function with a 128-
bit hash value.
•
SHA functions refer to five Federal Information Processing
Standard-approved algorithms for computing a condensed
digital representation.
The ES8509-XT provides two user authentication protocols in MD5
and SHA. You need to configure SNMP v3 parameters for your
SNMP tool with the same authentication method.
Auth Password
Enter the SNMP v3 user authentication password.
DES Password
Enter the password for SNMP v3 user DES Encryption.
Add
Click to add an SNMP v3 user.
SNMP V3 Users
This table provides SNMP v3 user information.
Click Remove to remove a selected SNMP v3 user.
Click Reload to reload SNMP v3 user information.