Comtrol ES8509-XT - Manual (Page 179)

RocketLinx ES8509-XT User Guide: 2000557 Rev. C Warnings (CLI) - 179
Configuration Using the Command Line Interface (CLI)
Fault Relay Output (cont.)
Event Selection
Switch(config)# warning-event
coldstart Switch cold start event
warmstart Switch warm start event
linkdown Switch link down event
linkup Switch link up event
authentication Authentication failure event
fault-relay Switch fault relay event
power Switch power failure event
sfp-ddm Switch SFP DDM abnormal event
super-ring Switch super ring topology change event
time-sync Switch time synchronize event
Example:
Cold Start event
Switch(config)# warning-event coldstart
Set cold start event enable ok.
Example:
Link Up event
Switch(config)# warning-event linkup
[IFNAME] Interface list, ex: gi2
Switch(config)# warning-event linkup gi2
Set gi5 link up event enable ok.
Display
Switch# show warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: gi4-5
Link Up: gi4-5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disabled
SFP DDM: Enabled
Syslog Configuration
Local Mode Switch(config)# log syslog local
Server Mode
Switch(config)# log syslog remote
192.168.250.33
Both
Switch(config)# log syslog local
Switch(config)# log syslog remote 192.168.250.33
Disable Switch(config)# no log syslog local