Comtrol ES8509-XT - Manual (Page 92)

92 - VLAN Configuration RocketLinx ES8509-XT User Guide: 2000557 Rev. C
Configuration Using the Web Interface
This figure displays how to configure the Egress
rule of the ports.
Use the following steps to configure Egress rules:
1. Select the VLAN ID. The entry of the selected
VLAN turns to light blue.
2. Assign Egress rule of the ports to U or T.
3. Press Apply to apply the setting.
If you want to remove one VLAN, select the
VLAN entry and then click the Remove button.