Snmp traps – Comtrol ES8509-XT User Manual
Page 107
RocketLinx ES8509-XT User Guide: 2000557 Rev. C
SNMP Traps- 107
Configuration Using the Web Interface
SNMP Traps
SNMP Trap is the notification feature defined by SNMP protocol.
All the SNMP management applications can understand such
trap information. So you do not need to install new applications
to read the notification information.
You can see the change of the SNMP pre-defined standard traps and Comtrol pre-defined traps. The pre-
defined traps can be found in the
Comtrol private MIB
.
Note: You must Save the settings (
), if you want to maintain these settings if the ES8509-XT is
powered off.
SNMP Trap Page
SNMP Trap
Click Enable or Disable SNMP trap
functionality.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if
you want to maintain these settings if the
ES8509-XT is powered off.
SNMP Trap Server
Server IP
The SNMP trap server IP address.
Community
The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Add
Click the Add button to add a SNMP server.
Trap Server Profile
Server IP
The SNMP trap server IP address
Community
The SNMP trap server community string.
Version
The SNMP trap version, V1 or V2c.
Remove
Click the Remove button to remove selected
SNMP server.
Reload
Click the Reload button to reload SNMP server
information.