Comtrol ES8509-XT - Manual (Page 49)

RocketLinx ES8509-XT User Guide: 2000557 Rev. C Basic Settings - 49
Configuration Using the Web Interface
Basic Settings
The Basic Setting group allows you the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
The following web pages are included in this group:
• Switch Setting on Page 49
• Admin Password on Page 50
• IP Configuration on Page 51
• Time Setting on Page 53
• DHCP Server Configuration on Page 56
• Backup and Restore on Page 61
• Firmware Upgrade on Page 64
• Factory Defaults on Page 66
• System Reboot on Page 66
Optionally, you can use the CLI for configuration, see Basic Settings (CLI) on Page 142.
Switch Setting
You can assign the System Name, Location, Contact and view ES8509-XT information.
Switch Setting Page
System Name
You can assign a name to the ES8509-XT. You can input up to 64 characters. After
you configure the name, The CLI system selects the first 12 characters as the name
in CLI system.
System Location You can specify the ES8509-XT physical location with up to 64 characters.
System Contact
You can specify contact people with up to 64 characters by typing the Administer’s
name, mail address or other information.