Comtrol ES8509-XT User Manual
Page 12
Advertising
12 - Mount the ES8509-XT
RocketLinx ES8509-XT User Guide: 2000557 Rev. C
Hardware Installation
Follow the steps below to install the ES8509-XT with the wall mounting plate:
1.
To remove the DIN rail clip from the ES8509-XT, loosen the screws from the DIN rail
clip.
2.
Place the wall mounting plate on the rear panel of the ES8509-XT.
3.
Use the screws to attach the wall mounting plate to the ES8509-XT.
4.
Use the hook holes at the corners of the wall mounting plate to hang the ES8509-XT
onto the wall.
5.
To remove the wall mounting plate, reverse the steps above.
Wall Mount Installation
Advertising