Comtrol ES8509-XT - Manual (Page 86)

86 - Loop Protection RocketLinx ES8509-XT User Guide: 2000557 Rev. C
Configuration Using the Web Interface
Loop Protection
Loop protection prevents broadcast loops in Layer 2 switching configurations.
Loop Protection Page
Transmit Interval
Loop protection mechanism detection packet transmitting interval
1 ~ 10 seconds (default is 1).
Port The port ID.
Loop Protection Enable/Disable loop protection mechanism on port.
Status The status of loop protection.
Apply
Click Apply to apply the settings.
Note: You must Save the settings ( Page 127 ), if you want to
maintain these settings if the ES8509-XT is powered off.
Enable/Disable All
Click the Enable/Disable All button to enable or disable all ports
and then click Apply button to apply.
Reload Click the Reload button to reload loop protection information.