Roland VS-890 - Manual (Page 10)

Error Messages
Finalized CD !
This message appears when an attempt is made to write to a
commercial CD or a finalized CD-R disc. Replace the disc
with a blank disc or one that has not been finalized.
Illegal Track Pair!
You are trying to Track Edit (Copy, Move, or Exchange etc.)
between a V-track that has been recorded with "CDR"
(Recording Mode or CDRRecMode) and a normcd
V-track. Please select the source and the destination V-tracks
again.
Function Failed
Processing was halted due to insufficient memory or due to
an error which occurred in the disk drive itself. Check
connections and reliability.
Hardware Error!
There is a problem with the disk drive. Contact the
manufacturer or dealer of the disk drive.
illegal Track!
You are trying to Phase New between a V-track (take) that
has been recorded with "CDR" (Recording Mode or
CDRRecMode) and a normal V-track (take). Please select the
source and the destination V-tracks again.
Lack of CD-R Memory!
There is insufficient free space to write the songs to the CD-
R/RWdisc.
Lack of EVENT !!
You have tried to UNDO or REDO when the remaining
number of Event is less than 200. You cannot continue the
current operation.
Lack of IDE Memory!
There is insufficient free space on the internal IDE hard disk
to make the image data file.
MARKER Memory Full!
The VS-890 has used up all Marker Memory (1000 Markers)
that can be handled by one song. Delete unneeded Marker.
Medium Error!
There is a problem with the disk drive media. This disk
cannot be used by the VS-890. In some case's recovery can be
achieved by executing Drive Check.
No CD-R Drive !
Either no CD recorder (CD-R/RW drive) is connected, or the
power is not turned on.
No Data to Write
The track that you have selected to write to CD-R/RW disc
contains no song data.
No Disc
There is no di.sc in the Roland CD recorder (CD-R/RW
drive). Please insert a disc.
No Drive Ready
No disk drive is connected. Or, an internal hard disk is not
installed. Make sure that the disk drive is connected
correctly.
No IDE Drive !
The unit has no IDE-type disk drive. Install an internal hard
disk.
Not 44.1 k Song !
The sample rate of the song is not 44.1 kHz, so the data
cannot be written to the CD-R/RW disc.
Not 512byte/sector
The disk that you are using is not 512 bytes/sector. This disk
cannot be used by the VS-890.
Not Ready!
The disk drive is not ready. Wait a short time.
Obey Copyrights ?
This message asks if you agree to the terms and conditions
regarding the reproduction, broadcast, and sale of the
software. Please carefully read the License Agreement.
Please Insert CD-R Disc !
Either the Roland CD recorder (CD-R/RW drive) loading
tray is still open, there is no CD-R/RW disc loaded, or the
CD-R/RW drive is otherwise not ready. Insert CD-R/RW
disc.
Please Wait...
Operation is in progress. Please wait momentarily.
SCSI ID Error!
The SCSI ID numbers of two or more disk drives are
conflicting. Make settings so that the SCSI ID numbers do not
conflict.
SPC Not Available!
The SCSI components of the VS-890 have malfunctioned.
Contact servicing by your dealer or qualified Roland service
personnel.
10