St phaser (stereo phaser), Continued, Algorithm list – Roland VS-890 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Algorithm List
St Phaser (Stereo Phaser)
A phaser adds a phase-shifted sound to the direct sound, producing a twisting modulation that creates
spaciousness and depth.
Parameter (full name)
Setting
Function
PHS (Phaser):
Phaser (Switch)
Adds a sound with a shifted phase to the direct sound to add spaciousness to the sound.
On, Off
Turns the phaser on or oft.
Mode (Mode)
4, 8,12,16
Sets the number of stages in the phaser (p. 75).
Rate (Rate)
0.1-10.0 Hz
Sets the rate at which the phaser will modulate.
Depth (Depth)
0-100
Sets the depth of modulation.
Pol (Polarity)
Sync, Inv
Sets the right and left phases of modulation. *3
Manual (Manual)
0-100
Sets the reference frequency for adding the surging effect
to the sound.
Reso(Resonance)
0-100
Enhances frequency components at around the center
frequency set with Manual. *1
CrossFB (Cross-Feedback Level)
0-100
Sets the amount of the phaser sound to be returned to the
channel opposite to the one used for input. *2
EFLevel (Effect Level).
-100-100
Sets the volume of the phaser sound.
DiLevel (Direct Level)
-100-100
Sets the volume of the direct sound.
Continued...
47