Special key operations, Select/ch edit buttons, Edit condition buttons – Roland VS-890 User Manual
Page 14: I transport control buttons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special Key Operations
Here is a list of the functions that can be performed by pressing multiple buttons, or using the
TIME/VALUE dial
in conjunction with a button.
SELECT/CH EDIT buttons
[SHIFT] + [Assign (SELECT 1)]:
[SHIFT] + [V.Track (SELECT 2)]:
[SHIFT] + [EQ Low (SELECT 3)]:
[SHIFT] + [EQ Mid (SELECT 4)]:
[SHIFT] + [EQ Hi (SELECT 5)]:
[SHIFT] + [AUX Send (SELECT 6)]:
[SHIFT] + [EFFECT-1 (SELECT 7)]:
[SHIFT] + [EFFECT-2 (SELECT 8)]:
[STATUS] + SELECT buttons:
[STATUS] + SELECT buttons:
[STATUS] + SELECT buttons:
[AUTOMIX] + SELECT buttons:
[SHIFT] + [SOLO (EZ ROUTING)]:
[SHIFT] + [EDIT (FADER)]:
To the Assign setting page (Track Mixer)
To the V-track setting page (Track Mixer)
To the Equalizer low gain/Frequency setting page
(When EQ Sw is On)
To the Equalizer mid gain setting page
(When EQ Sw is On, using 3bandEQ)
To the Equalizer high gain/Frequency setting page
(WhenEQSwisOn)
To the AUX switch setting page
To the Effect 1 switch setting page
To the Effect 2 switch setting page
Select source to be recorded on the track (Input Mixer)
Select track to be recorded on the track
(Track Mixer; Track bouncing)
Select effect return and stereo in to be recorded on the track (Effect
Return Mixer)
Select whether auto-mix will be recorded / pi ayed / ignored for
each channel (when Automix is On)
Solo mode on/off
To the Master block setting page
EDIT CONDITION buttons
[SHIFT] + [SYSTEM]:
[SHIFT] + [SONG]:
[SHIFT] + [EFFECT]:
Switch the sync source
Display various information about the song (Play condition)
Switch between the effect select page, effect name page, and effect
on/off page (Effect condition)
I Transport Control buttons
[SHIFT] + [STORE (ZERO)]:
[SHIFT] + [SONG TOP (REW)]:
[SHIFT] + [SONG END (FF)]:
[SHIFT] + [SHUT/EJECT (STOP)]:
[SHIFT] + [RESTART (PLAY)]:
[REC] + [STATUS];
[STOP] + [STATUS]:
Store song data to the disk drive
Move to the time where the first sound of the song is recorded
Move to the time where the last sound of the song is recorded
Shut down
Restart (after shut down)
Switch the track status to REC (STATUS indicator blinks red)
Switch the track status to PLAY (STATUS indicator lights green)
14