Algorithm list, Graphic eq (! 0-band graphic equalizer) – Roland VS-890 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Algorithm List
*1: If Low Type (LowType) or High Type (Hi Type) is set to "Shiv (Shlving Type)," the setting for LowQ or High Q
is invalid.
Graphic EQ (! 0-Band Graphic Equalizer)________________________
This Equalizer sets the boost/ cut amount by each segment of the frequency divided into ten bands. In performing
PA at a live, this feature is useful to prevent howling by cutting the site-specific resonance frequency.
Parameter (full name)
Setting
Function
LNK (Link): Makes Channel B follow the settings for Channel A.
Link (Link Switch)
On, Off
Specifies if Channel B follows or does not follow the
settings for Channel A.
EQA/ EQB (10-Band Graphic Equalizer): Simulates a 10-band graphic equalizer.
EQA, EQB (Switch)
On, Off
Turns the parametric equalizer on or off.
Inputs (Input Gain)
-60-+12dB
Sets the overall volume before passing through the
equalizer.
31.2-16 k (Gain)
-12-+12dB
Sets the boost/cut amount at the respective frequencies.
Level (Output Level)
-60-+12dB
Sets the overall volume after passing through the equalizer.
63