Roland VS-890 - Manual (Page 73)

Algorithm List
TapeEcho201
Simulates the tape echo section of the Roland RE-201 Space Echo. Capable of reproducing very subtle behavior at
the measuring instrument level as well as adding subtle changes in pitch due to deterioration of the tape or
inconsistency in tape rotation
Input L
Input R
Output L
TapeEcho201
Output R
About replay head
RE-201 is equipped with three heads for creating sounds with different delay times (short, middle and long delay
sounds). A desired combination of heads for use can be selected with Mode Selector (Mode).
In addition, separate panning features for the three replay heads not included in RE-201 are added.
Parameter (full name) Setting Function
Tape Echo 201: Simulates the tape echo section of the Roland RE-201 Space Echo.
SpaoeEoho (Switch) On, Off Turns the tape echo on or off.
ModeSelect (Mode Selector) 1-7 Selects a combination of the three replay heads.
RepRate (Repeat Rate) 0-100 Sets the tape speed.
Intensity (Intensity) 0-100 Sets the number of repeated the delay sound.
EhoVol (Eho Volume). 0-100 Sets the volume of the tape echo sound.
DireotVol(Direot Volume) 0-100 Sets the volume of the direct sound.
Bass (Tone Bass) -100-+100 Sets the low frequency band tone of the tape echo sound.
Treble (Tone Treble) -100-+100 Sets the high frequency band tone of Tape Echo sound.
Heads Pan (Pan Head S) L63-R63 Sets the pan settings for the short delay playback head.
HeadM Pan (Pan Head M) L63-R63 Sets the pan settings for the middle delay playback head.
HeadL Pan (Pan Head L) L63-R63 Sets the pan settings for the long delay playback head.
TapeDist (Tape Distortion) 0-100 Adds tape-specific distortion.
WahRate (Wah-Flutter Rate) 0-100 Sets the fluttering rate of pitch due to deterioration of the
tape or inconsistency in the rotation.
WahDepth (Wah-Flutter Depth) 0-100 Sets the fluttering depth of pitch due to deterioration of the
tape or inconsistency in the rotation.
73