Roland VS-890 - Manual (Page 28)

Algorithm List
Delay
Delay is a feature to add a delayed sound to the direct sound in order to add thickness to the sound or to yield a
special effect.
Parameter (full name) Setting Function
DLY(Delay): Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.
Delay (Switch) On, Off Turns the delay on or off.
Time (Delay Time) 0-1200 ms Sets the time from direct sound until when the delay sound
is heard. *1
Shft (Delay Shift) L1200-0-R1200 ms Sets the delay time difference between the right and ieft
delay sounds.
L-FBLvl (Lch Feedback Level) -100-100 Sets the amount of the left-side delay should be returned to
the delay Input.
R-FBLvl (Rch Feedback Level) -100-100 Sets the amount of the right-side delay should be returned
to the delay input.
L-Level (Lch Effect Level) -100-100 Sets the volume for the left-side delay sound.
R-Level (Rch Effect Level) -100-100 Sets the volume for the right-side deiay sound.
DILevel (Direct Level) -100-100 Sets the volume of the direct sound.
LD.G (LF-Damp Gain) -36-0 dB Sets the degree of attenuation in the low frequency band for
the delay sound fed back.
LD.F (LF-Damp Frequency) 50-4000 Hz Sets the frequency at which attenuation in the tow
frequency band starts to the delay sound fed back.
HD.G (HF-Damp Gain) -36-0 dB Sets the degree of attenuation in the high frequency band
for the delay sound fed back.
HD.F (HF-Damp Frequency) 1.0-20.0 kHz Sets the frequency at which attenuation in the high
frequency band starts to the delay sound fed back.
28