Appendix f haltech e6gmx specifications – Haltech E6GMX User Manual
Page 110
E6GMX Manual
110
APPENDIX F
HALTECH E6GMX SPECIFICATIONS
Engine Suitability
•
Up to 16,000 rpm
•
4, 6, & 8 cylinders
•
Normally aspirated or supercharged up to 200 kPa (30psi) - Higher boost pressure MAP sensors
available by special arrangement
•
Load sensing by throttle position or manifold pressure
•
Multipoint & batch-fire injection patterns
•
Distributed & GM DFI
Power Requirements
••••
Power Source
8.6 to 16 Volts DC
••••
Consumption
Haltech ECU:
270 mA at 12 Volts
Injector Load:
Dependent on injector type used - Max : 8A pk 2A hold per driver
Physical Specifications
•
ECU Dimensions
Length:
185 mm (7 7/25")
Width:
145
mm
(5
5/8")
Depth:
41 mm (1 5/8")
•
Weight
ECU:
650g
(1.43
lb)
Shipping Weight:
2kg (4.41 lb)
(Including
manual/packaging)
Input Sensors
•
Manifold Absolute Pressure (MAP) Sensor (supplied at extra cost)
1 Bar
-100kPa to 0kPa
(Naturally Aspirated)
2 Bar
-100kPa to 100kPa
(up to 1 Bar or 15 psi boost)
3 Bar
-100kPa to 200kPa
(up to 2 Bar or 30 psi boost)
Higher boost pressure MAP sensors available by special arrangement
•
Temperature Sensors (Air and Coolant)
NTC temperature dependent resistor type.
Operating Range
Continuous
-40°C to 100°C (-40°F to 212°F)
Intermittent
up to 125°C
(257°F)
•
Throttle Position Sensor
10
k
Ω
rotary potentiometer driven from throttle shaft
•
Internal Barometric Pressure Sensor
Barometric pressure compensation only