Haltech E6GMX - Manual (Page 44)

E6GMX Manual
44
4.4.6 3D View
The 3D view is available for the 3D Fuel and Ignition maps. An example of the 3D maps is
shown in this figure below.
The adjustments for these maps is similar to the 2D view with the following differences,
•
To move up and down the RPM range the up and down arrow keys are used instead of
N and P.
•
To move up and down the Load range the left and right arrow keys are used.
•
The fine increments are controlled by “A” for add and “S” for subtract.
•
The copy and paste functions are not available for this view.
To access these views the user can do the following,
•
Use the Maps Menu by selecting Maps->Fuel/Ignition Map 1 / 2 -> 3D View
•
Ctrl – Alt – F or I