Haltech E6GMX - Manual (Page 12)

E6GMX Manual
12
1.2.3 Install and Connect any Optional Outputs
If you are planning to use any of the Programmable Optional Outputs, install and connect
them now. Depending on what options you are using, the wiring will be different. For details
on wiring your particular options, refer to CHAPTER 11
Digital Outputs & PWM Outputs,
p77.
1.2.4 Connect the ECU
The ECU can now be connected, be sure to engage the clip on the main connector. The
system can now be tested as described in the following chapters.