Haltech E6GMX - Manual (Page 25)

E6GMX Manual
25
Press the Go Online button in the top left hand corner. This will start communications with
the ECU. The Status bar will indicate the load status, which is illustrated below,
When the progress bar reaches 100% the programming software has finished uploading the
data from the ECU and the status bar will show “HALTECH CONNECTED” and the status
bar will be blue. If the text “HALTECH DISCONNECTED” flashes this means that the
programming PC cannot communicate with the ECU, check:
- The ECU has power
- The communications cable is connected
- The communications cable is free from faults
3.2.2 The Engine Data and Gauge Page
The Engine Data page, as its title suggests, displays engine information in real time so the
user knows the operating conditions of the engine at all times. The engine data page can be
used to test that the ECU and its sensors are working correctly. There are two forms of the
Engine Data page, the Text view and the gauge page. Both views are shown below,
Status
Bar