Haltech E6GMX - Manual (Page 13)

E6GMX Manual
13
CHAPTER 2 INSTALLING THE SOFTWARE
Now that your ECU is installed the programming software must be installed so that tuning
can begin.
This Chapter will explain how to install and run HalwinX, the Haltech Programming
Software.
2.1 Computer Requirements
HalwinX requires a PC running Windows 95 release 2, Windows 98, Windows 2000,
Windows Millennium or Windows XP with the following specifications.
Minimum Requirements:
233MHz
processor
VGA colour display 800x600 (preferably 1024x768)
4 MB of memory
10 MB of free Disk space
Recommended:
PIII 500MHz processor
VGA colour display 1024x768
16 MB of memory
10 MB of free Disk space
2.2 Operating the Software
2.2.1 Installing the Software
Installing Halwin onto your PC is performed similar to any other Windows software package.
Installation is outlined below to ensure correct installation:
1. Insert the CD-ROM into your PC’s CD-ROM drive.
2. Double click on the “My Computer” icon on the desktop.