Chapter 12 network settings, Configuring general network settings – Interlogix NVR 50 User Manual User Manual
Page 105
Advertising
TruVision NVR 50 User Manual
99
Chapter 12
Network settings
You must configure your NVR’s network settings before using it over the network.
The NVR must have access to the internet when configuring the network
settings.
Note:
As every network configuration may differ, please contact your Network
Administrator or ISP to see if your NVR requires specific IP addresses or port
numbers.
Configuring general network settings
To configure general network settings:
1. Click the
Network settings
icon in the menu toolbar to display its screen.
2. Click
General
and enter the required settings:
Advertising