Interlogix NVR 50 User Manual - Manual (Page 141)

16BChapter 17: iTVRmobile
TruVision NVR 50 User Manual 135
Device management
The device list is empty by default. You must first add the required devices to the
iTVRmobile device list before you can access them.
Note: Up to 16 devices can be added to the application.
To add a new device:
1. In the main menu, tap Devices . The Devices page appears. All devices
already added to the app are listed.
2. Tap Add . The New Device page appears.
3. Enter the following information:
Device name: Enter the name of the device to be linked, such as a TruVision
NVR or TruVision IP cameras. The name can have up to 16 alphanumeric
characters.
Register mode: Select either IP or DDNS. Use DDNS when there is no fixed
IP address available.
Address: Enter the IP or dynamic name address of the device.
Port: Enter the com port address of the device. For example, 8000 (default).
User name: Enter the device’s user name. It can have up to 16 alphanumeric
characters.
Password: Enter the device’s password.
Chan. no.: Enter the number of cameras to be linked.
4. Tap Save to save the settings. The device is added to the device list.
5. In the Device page, tap Add again to add another device to the application or
tap iTVRmobile to exit and return to the main menu.
To modify or delete a device:
1. In the main menu, tap Devices . The Devices page appears. All devices
already added to the app are listed.
2. To modify the parameters of a device: Tap next to the selected device to
be modified. The list of parameters that can be modified appears. Tap Edit .
Tap the parameter to be modified and enter the new value using the keypad.
Tap
Done and then Save to save the changes or Cancel to abort and return
to the Devices Detail screen.
3. To delete a device: Swipe your finger across the device to be deleted in the
list. The Delete button appears. Tap Delete .
4. Tap iTVRmobile to exit and return to the main menu.