Interlogix NVR 50 User Manual - Manual (Page 91)

9BChapter 10: Recording
TruVision NVR 50 User Manual 85
 TL-Lo (Bright green): Low quality time lapse. Records low quality video. This could be used,
for example, for night recordings when few events or alarms are expected. Saving the
video in low quality helps save resources on the HDD.
 Event (Yellow): Records only events, such as motion detection and POS/ATM text insertion.
 Alarm (Red): Records only alarms.
 None (Grey): No recording during this period.
5. Timeline. There is a 24-hour time line for each day. Up to eight recording periods can be
scheduled during the 24-hour period.
Daily schedules
To set up a daily recording schedule:
1. Click the Video Schedule icon in the menu toolbar and select S chedule .
2. Select a camera.
3. Check the Enable Schedule box.
4. Click Edit. The following screen is displayed ((by default, All Day is selected):
5. Select the day of the week for which you want to set up the schedule.
You can define a schedule for each day of the week.
6. Set the start and end time for recording.
Define a time period by entering a start (left column) and end (right column)
time. You can schedule up to eight time periods. Click All Day to record all
day.
Note : Time periods defined cannot overlap.
7. Select a recording type.
This setting instructs the NVR to begin recording when an alarm is triggered.
The recording type can be based on time and triggered by motion detection