Interlogix NVR 50 User Manual - Manual (Page 19)

2BChapter 3: Getting started
TruVision NVR 50 User Manual 13
Note: The system time and date are visible on screen. However, they do not
appear in recordings.
Click Next to move to the next page, or Previous to return to the previous
page.
7. Network configuration:
Configure your network settings such as the NIC type, Enable or Disable
DNCP,IP address, subnet mask and default gateway. Enter the preferred
DNS server address as well as the alternate one to use.
Click Next to move to the next page, or Previous to return to the previous
page.
8. HDD management:
Configure your HDD settings as required.
You can group HDDs and assign cameras to a group. See “Setting up HDD
groups” on page 110 for further information. You can also set up a drive for
redundant recording. See “Configuring redundant recording” on page 89.