Interlogix NVR 50 User Manual - Manual (Page 99)

10BChapter 11: Alarm settings
TruVision NVR 50 User Manual 93
5. Set the sensitivity level.
Drag the Sensitivity scroll bar to the desired sensitivity level. The highest
value is on the right of the bar.
6. Select the cameras that will record the motion detected.
Click Rule . The Rule screen appears. Click the Trigger Channel tab and
select the cameras that will record when a motion alarm is triggered. Click
Apply to save the settings.
7. Select the recording schedules for motion detection.
Click the Arming schedule tab and select the day of the week and the time
periods during the day when motion can be recorded. You can schedule up to
eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click Copy to copy the settings to other
days of the week.
Note: Time periods defined cannot overlap.
8. Select the response method to motion detection.