Interlogix NVR 50 User Manual - Manual (Page 47)

TruVision NVR 50 User Manual 41
Chapter 6
Controlling a PTZ camera
You can control PTZ dome cameras using the buttons on the front panel, the
keypad, and IR remote control as well as using the PTZ control panel accessed
with the mouse. Access to PTZ commands may require a password.
A detailed list of the PTZ commands available for many different camera
protocols is available in Appendix F on page 153.
Calling up presets, tours and shadow tours
When in live view you can quickly call up the list of existing presets, preset tours
and shadow tours by using the front panel, remote control, mouse and keypad.
Front panel Press the joystick to Enter. PTZ control panel appears.
Mouse Left-click the mouse on the desired camera image. The quick access
toolbar appears. Click the PTZ control icon to enter PTZ mode. The PTZ
control panel appears.
Remote control Press the OK button. The PTZ control panel appears.
Keypad Press the Enter button on the keypad. For further information, see
Appendix D “KTD-405 keypad” on page 141.
If the display is in multiview format, it changes to full screen format for the
selected camera. See Figure 20 below for a description of the PTZ control panel.