Interlogix NVR 50 User Manual - Manual (Page 116)

12BChapter 13: HDD management
110 TruVision NVR 50 User Manual
1. Click the System Settings icon in the menu toolbar and then click Hard Disk .
2. Click the Storage mode tab.
3. Under the Mode option, select Quota .
4. Select a camera whose storage capacity you want to change and enter the
values in GB for maximum record capacity and maximum picture capacity.
The maximum storage capacity of the HDD is listed.
5. Click Apply to save the settings.
6. If you want to copy these values to other cameras, click Copy and select the
cameras. Click OK . Click Apply to save the settings.
Setting up HDD groups
Your NVR can organize multiple HDDs into groups. Videos from specified
channels can be set to be recorded onto a particular HDD group. You could, for
example, save the records from a couple of high priority cameras to one HDD,
and save the recordings from all the other cameras to another HDD.
To set up a HDD group:
1. Click the System Settings icon in the menu toolbar and then click Hard Disk .
2. Select the Storage Mode tab.
3. Under Mode , select Group .
4. Under Record on HDD Group , select the HDD group number.
5. Check the channels to be added to this group.
Note: By default, all channels belong to HDD group 1.
6. Click Apply to save the settings.