Interlogix NVR 50 User Manual - Manual (Page 115)

TruVision NVR 50 User Manual 109
Chapter 13
HDD management
Initializing HDDs
The in-built HDD must be initialized before it can be used. You can also re-
initialize the HDD. However, all data on the HDD will be destroyed.
To initialize a HDD:
1. Click the System Settings icon in the menu toolbar and then click Hard Disk
to display its screen.
2. Select the HDD to be initialized.
3. Click the Initialize button to begin initialization.
After the HDD has been initialized, the status of the HDD changes from
Abnormal to Normal.
Controlling disk space on the HDD
You can allocate on a HDD the maximum permitted storage and snapshot
capacities from each camera.