Interlogix NVR 50 User Manual - Manual (Page 127)

TruVision NVR 50 User Manual 121
Chapter 15
NVR management
This chapter describes:
 Configuring the RS-232 port
 Updating system firmware
 Restoring default settings
 Viewing system information
 Viewing system logs
Configuring the RS-232 port
Use the System Settings menu to configure the RS-232 parameters such as
baud rate, data bit, stop bit, parity, flow control, and usage.
There are three ways the RS-232 port can be used:
 ProBridge: POS and ATM text insertion supported via the ProBridge
accessory connected to the RS-232 port. See “Capturing text insertions” on
page 76 for more information.
 ATS/Challenger: NTP time sync supported to foreign device over the RS-232
port.
 Technical support: Console mode.