Canon DR-X10C - Manual (Page 113)

8-7
Chapter 8 ISIS/TWAIN Driver Settings
[Auto Color Detection]
The document is detected as black-and-white or color
before the scanned image is saved.
Selecting this mode enables the [Setting] button for
opening the [Auto Image Type Detection Settings] dialog
box, where you can make settings for auto image type
detection.
(See “[Auto Image Type Detection Settings]
Dialog Box” on p. 8-10.)
IMPORTANT
Depending on the application program, operation may become
unstable when [Auto Color Detection] is enabled. In that case,
[Auto Color Detection] should be disabled.
Page Size
Select the page size of the document to be scanned.
IMPORTANT
• Select [Auto-detection] to scan the following kinds of
documents.
– Documents of a non-standard size
– Documents containing pages of different sizes
– When using the Long Document mode
(See “Long
Document Mode Setting” on p. 3-5.)
• When [Auto-detection] is selected, the area settings in the
Scan Area dialog box are disabled.
• The [Auto-detection] process may malfunction in the following
situations. If this occurs, select a standard size such as [A4] or
[Letter], or click the [Area] button to create a custom page size.
(See “[Scan Area] Dialog Box” on p. 8-11.)
– When scanning a page with a dark area at the left or right
edge
– When scanning a glossy or reflective document
– When the brightness setting is incorrect
– When the Custom setting is selected in the Gamma Settings
dialog box
• Depending on the application program, operation may
become unstable when [Auto-detection] is enabled. In that
case, [Auto-detection] should be disabled.
Dots per inch
Select the scanning resolution.
Hint
• Higher resolutions provide clearer images, but produce larger
files.
• The [Moire Reduction] setting is enabled when the resolution
is set to 300 dpi or lower, and the [Image Quality] setting is
enabled when the resolution is set to 400 or 600 dpi.
• The [Advanced Text Enhancement II] mode cannot be used
when the resolution is set to 400 or 600 dpi.
Scanning Side
Select which page side(s) to scan.
[Simplex]
Scans the front side (top) of documents.
[Duplex]
Scans both sides of documents.
[Skip Blank Page]
As each document page is scanned, its scanned image is
judged as to whether it is blank, and if so, the image is not
saved.