Canon DR-X10C - Manual (Page 129)

8-23
Chapter 8 ISIS/TWAIN Driver Settings
Code 39
Detect Code 39 barcodes.
[Enable]
Detect and read Code 39 barcodes.
[Full Ascii]
Read barcodes in Full ASCII Code.
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.
[Output ST/SP]
Select this check box to output Start and Stop codes.
Codabar
Detect Codabar barcodes.
[Enable]
Detect and read Codabar barcodes.
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.
[Output ST/SP]
Output Start and Stop codes included in barcodes.
[Method]
Select the checksum calculation method.
Code 128
Detect Code 128 barcodes.
[Enable] Check Box
Select this check box to detect and read Code 128
barcodes.
ITF
Detect ITF barcodes (including industrial 2 of 5).
[Enable]
Detect and read ITF barcodes.
[Checksum]
Read the checksum included in barcodes.
[Output Checksum]
This check box is enabled when [Checksum] is selected,
and outputs the read checksum.