Canon DR-X10C - Manual (Page 99)

7-4
Chapter 7 Appendix
Options
Pre-Imprinter Unit (Product Code: 2418B003)
This imprinter unit prints a text string on document pages
before scanning them.
(See “Imprinter (Optional)” on p. 4-8.)
Post-Imprinter Unit (Product Code: 2418B004)
This imprinter unit prints a text string on document pages
after scanning them.
(See “Imprinter (Optional)” on p. 4-8.)
Barcode Module (Product Code: 8927A003)
Add-on software that enables barcode recognition by the
ISIS/TWAIN driver.
(See “[Barcode] Dialog Box Settings”
on p. 8-21.)
Patchcode Decoder (Product Code: 2418B005)
This unit detects patchcode sheets within documents.
(See
“Using Patchcode Sheets (Option)” on p. 3-18.)
Consumables
Roller Replacement Kit (Product Code: 2418B001)
Replacement kit for transport rollers (pick-up roller, feed
rollers, and retard roller).
(See “Replacing the Transport
Rollers” on p. 5-12.)
IMPORTANT
• Rollers are consumable parts. When the rollers start to wear out,
problems, such as paper jams and misfeeds, are more likely to
occur. If this happens, replace the rollers, regardless of the page
count.
• For information about the roller replacement kit, contact your local
authorized Canon dealer or service representative.
Cleaning Sheets (Product Code: 2418B002)
This is a package of cleaning sheets for cleaning the transport
rollers.
(See “Cleaning Rollers with a Cleaning Sheet” on
p. 5-4.)
Ink Cartridge: Blue (Product Code: 3693A002)
This blue ink cartridge is used by the pre- and post-imprinters.
(See “Replacing Ink Cartridges” on p. 5-15.)
Ink Cartridge: Red (Product Code: 3693A003)
This red ink cartridge is used by the pre- and post-imprinters.
Ink Cartridge: Green (Product Code: 3693A004)
This green ink cartridge is used by the pre- and post-
imprinters.